CFD analysis for small companies: a fixed-price flow simulation with a written report
Most UK CFD consultancies quote £1,500 to £5,000 for a single steady-state case and price by the hour. Sync 3D's simulation lead holds a Ph.D. in computational fluid dynamics and runs every study personally in OpenFOAM, so a typical study is £280 to £1,200, quoted as a fixed price within one working day from your CAD and operating conditions. You get a written engineering report with the numbers you asked for, the plots that show why, and two rounds of revision included. If the part is then worth testing, we print it in PETG from £3.50 and post it.
Prices and facts checked 5 November 2026: CFD studies typically £280 to £1,200 fixed price, quoted within one working day; 3D printed test pieces from £3.50; no VAT added.
What we simulate
| Study | Typical parts | What the report gives you |
|---|---|---|
| Internal flow and pressure drop | Ducts, manifolds, valves, nozzles, filters, pipework, intake and exhaust paths | Pressure drop, flow split between outlets, velocity hot-spots, where to add a radius or a vane |
| External aerodynamics | Drone and UAV bodies, bike and vehicle components, enclosures in wind, hydrofoils and hulls | Drag and lift coefficients, pressure distribution, separation points, comparison of variants |
| Fans and ducted cooling | Fan-and-duct assemblies, electronics enclosures, server and battery boxes | Flow rate against resistance, recirculation, inlet and outlet placement |
| Conjugate heat transfer | Heatsinks, enclosures with powered components, heated pipework | Component temperatures, hot spots, the gain from a fin or a vent |
| Design comparison | Two to five variants of the same part | One table that ranks them on the number you care about, with the plots to show why |
Steady-state, single-phase studies are the usual case and sit at the lower end of the range. Transient, multiphase and rotating-machinery studies are quoted individually.
How a study runs
- Send the CAD and the conditions. A STEP, STL or 3MF, the fluid, the speed or flow rate, the temperatures if they matter, and the numbers you want out. An NDA can be signed first.
- Fixed quote within one working day. Price, scope and delivery date in one email. Nothing starts until you accept it.
- Geometry, mesh, solve. The domain is cleaned and simplified where it does not change the answer, meshed with refinement where the gradients are, and solved in OpenFOAM with convergence checked and recorded.
- Written report. Numbers, plots, a variant table if there were several, and recommendations. Two rounds of revision are included.
- Print and test, if you want. The same engineers print the part in PETG from £3.50 and post it within 48 hours of payment, so the simulation can be checked on the bench.
What moves the price
- Physics. Flow only is the cheapest; adding heat transfer roughly doubles the mesh and the run time.
- Geometry. A clean STEP with the flow domain already defined costs less than a scan or an assembly that needs hours of clean-up.
- Variants. Each extra variant of the same part is priced well below the first, because the setup is shared.
- Transient and multiphase. Quoted individually; these are the studies that reach four figures.
Who uses it
Product developers checking a duct or an enclosure before tooling; startups who need a number for an investor or a certification body; engineers sizing a fan or a filter; cycling, motorsport and marine builders comparing shapes; researchers and students who need a simulation they can cite with its method documented. Confidential work is normal: files are priced in the browser for printing, held only in our own systems for simulation, and deleted on request. See the privacy page.
Questions people ask
How much does CFD analysis cost in the UK?
UK consultancies typically charge £80 to £150 an hour and quote £1,500 to £5,000 for a single steady-state case. Sync 3D quotes a fixed price per study from the CAD and operating conditions, typically £280 to £1,200 including a written report and two rounds of revision, with no VAT added. The price depends on the geometry, the physics (flow only, or flow with heat transfer) and how many variants you want compared.
What do I need to send for a CFD quote?
A STEP, STL or 3MF of the part or the flow domain, the fluid (air, water or another), the inlet or free-stream speed or flow rate, the pressures or temperatures that matter, and the one or two numbers you want out, such as pressure drop, drag, lift, flow split or surface temperature. Sync 3D replies with a fixed price and the delivery date within one working day. An NDA can be signed first.
What software does Sync 3D use for CFD?
OpenFOAM for the solver, ParaView for post-processing and ANSYS Fluent where a client's workflow requires it. Meshing, solver settings and convergence checks are documented in the report so the study can be audited or repeated.
What do I get at the end of a CFD study?
A written engineering report: the question, the geometry and simplifications, the mesh and its quality, boundary conditions, convergence, the results as numbers and plots (pressure, velocity, temperature, streamlines, forces), a comparison table if several variants were run, and recommendations for the design. Images are supplied for your own documents. Two rounds of revision are included.
Can you simulate heat transfer and electronics cooling?
Yes. Conjugate heat transfer studies cover enclosures, heatsinks, fans and ducts, and give component temperatures and the flow that produces them. These sit at the upper end of the typical range because the physics and the mesh are heavier than a flow-only case.
Can you test the design after the simulation?
Yes, and this is the part most consultancies cannot do. Sync 3D prints the part in engineering-grade PETG from £3.50 and posts it within 48 hours of payment, so a duct, impeller, nozzle or housing can be simulated, printed and measured on the bench in the same week.
Get a fixed price for your flow problem
Email the CAD and the conditions. The quote, the scope and the delivery date come back within one working day.
Email a CFD enquiry